battery analyzer tester charger battery analyzer tester charger battery analyzer tester charger
battery analizing and charging battery analizing and charging battery analizing charging battery analizing and charging battery analizing charging
battery analizing and charging
 
 

Accessories: Standard

The UBA5 comes complete with software, cables and a power supply. You just need supply the computer with serial or USB port.
On this page we offer some accessories that extend the UBA5's capabilities.


Set of Banana Plugs

The UBA5 uses standard banana jacks for connecting to your battery. The UBA5 comes with a set of banana plug cables. If you want to make your own cables then you'll need a set of banana plugs. Although you can pick them up at most well stocked electronics stores, why take the chance? Order an extra set with your UBA5 and save time. Set of banana plugs.
  Part# CON2 Price  $10 USD  

Technical Reference Manual

The technical reference manual contains the UBA5 communication protocol and schematic with circuit description. It is required if you want to write your own software to control the UBA5.

  Part# TRM Price  $85 USD

Temperature Probes

The temperature probes allow the battery temperature to be monitored and to terminate charging at a specific temperature or dT/dt. The temperature is logged for further analysis.

Temperature Probes

The probes work for temperatures between 0 and 100 degrees Celsius. The Temperature Probes include the connector on the back of your UBA which is installed when you order the probes with your UBA5.

  Part# THERM2 Price  $55 USD

Magnetic Temperature Probes

The temperature probes allow the battery temperature to be monitored and to terminate charging at a specific temperature or dT/dt. The temperature is logged for further analysis.

Magnetic Temperature Probes

These probes use a small magnetic temperature sensor. This sensor attaches itself to NiCd, NiMH and lithium ion batteries and battery packs. It does not attach to lead acid nor lithium polymer batteries.

The probes work for temperatures between 0 and 100 degrees Celsius. The Magnetic Temperature Probes include the connector on the back of your UBA which is installed when you order the probes with your UBA5.

  Part# THERM2M Price  $70 USD

Dual Optoisolated Digital Output and Temperature Probes Module

This accessory has two opto isolated digital outputs and two temperature probes. You control these two digital outputs inside the battery analysis routines that you write.

Dual Optical Coupled Digital Outputs with Themperature Probes

  Part# DODOTP Price  $125 USD

Serial Port Opto-Isolator

Do you want to operate your UBA5 at a different ground potential from your PC? Then you need the Serial Port Opto-Isolator. This self powered isolator optically couples your UBA5 to your PC or to another UBA5. Use this isolator if the battery being tested is connected to equipment or to another battery being tested. Serial Port Opto-Isolator
  Part# SERISO Price  $65 USD

 


battery analizing and charging
battery analyzing and charging battery analyzing and charging battery analyzing and charging battery analyzing and charging
battery analizing chargingbattery analizing and charging
Works with Win7 32/64bit Top | Home | Products | Applications | Support | Testimonials | Site Map | Ordering | Contact Us | Canadians Valid HTML 4.01!